Logan 920 Lathe

Sort gallery by:

View:

0 0 1860

Ball Turner

0 0 4381

Current Picture Current Set Up with lots of tools!

0 0 4642

logan920-2

0 0 5113

carriagestop Machined clamp and an inexpensive eBay Micrometer make for an accurate carriage stop.

0 0 4987

drawbar-installed

0 0 4825

drawbar A stock piece of threaded draw bar tube from eBay cut to length, and turned and knurled a knob for it.

0 0 4067

belt-tension-knob My machine likes a slightly different belt tension for each speed. This knurled knob makes it easy.

0 0 4203

gears

0 0 5545

scarfed belt Car engine serpentine belt scarfed on a belt sander and glued with Loctite Plastics Bonding System has held up for over a year just fine. Enough belt material for two belts with this Gatorback number: 4061105

0 0 4001

Carriage DRO The lathe head end of the scale is held by a clamp and the other end (far bed end) floats.

0 0 4194

Carriage DRO Read head is screwed to a metal plate which is held to back of carriage with neodymium magnets.

0 0 4462

Crossfeed DRO Angle iron is stuck to rear of carriage with 4 neodymium magnets. Aluminum extension bar, wood spacer, and hose clamp complete a quick installation.